 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| d a t a sh eet product speci?cation supersedes data of 1999 sep 27 2004 may 19 integrated circuits 74ahc32; 74ahct32 quad 2-input or gate
2004 may 19 2 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 features esd protection: C hbm eia/jesd22-a114-b exceeds 2000 v C mm eia/jesd22-a115-a exceeds 200 v C cdm eia/jesd22-c101 exceeds 1000 v. balanced propagation delays all inputs have schmitt-trigger actions inputs accepts voltages higher than v cc for 74ahc32 only: operates with cmos input levels for 74ahct32 only: operates with ttl input levels specified from - 40 cto+85 c and - 40 c to +125 c. description the 74ahc32; 74ahct32 is a high-speed si-gate cmos device and is pin compatible with low power schottky ttl (lsttl). it is specified in compliance with jedec standard no. 7a. the 74ahc32; 74ahct32 provides the 2-input or function. quick reference data gnd = 0 v; t amb =25 c; t r =t f 3.0 ns. notes 1. c pd is used to determine the dynamic power dissipation (p d in m w). p d =c pd v cc 2 f i n+ s (c l v cc 2 f o ) where: f i = input frequency in mhz; f o = output frequency in mhz; c l = output load capacitance in pf; v cc = supply voltage in volts; n = total load switching outputs; s (c l v cc 2 f o ) = sum of the outputs. 2. the condition is v i = gnd to v cc . symbol parameter conditions typical unit 74ahc32 74ahct32 t phl /t plh propagation delay na, nb to ny c l = 15 pf; v cc = 5 v 2.8 3.1 ns c i input capacitance v i =v cc or gnd 3.0 3.0 pf c o output capacitance 4.0 4.0 pf c pd power dissipation capacitance c l = 50 pf; f = 1 mhz; notes 1 and 2 10 12 pf 2004 may 19 3 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 function table table 1 see note 1. note 1. h = high voltage level l = low voltage level. ordering information pinning input output na nb ny lll lhh hlh hhh type number package temperature range pins package material code 74ahc32d - 40 c to +125 c 14 so14 plastic sot108-1 74ahct32d - 40 c to +125 c 14 so14 plastic sot108-1 74ahc32pw - 40 c to +125 c 14 tssop14 plastic sot402-1 74ahct32pw - 40 c to +125 c 14 tssop14 plastic sot402-1 74AHC32BQ - 40 c to +125 c 14 dhvqfn14 plastic sot762-1 74ahct32bq - 40 c to +125 c 14 dhvqfn14 plastic sot762-1 pin symbol description 1 1a data input 2 1b data input 3 1y data output 4 2a data input 5 2b data input 6 2y data output 7 gnd ground (0 v) 8 3y data output 9 3a data input 10 3b data input 11 4y data output 12 4a data input 13 4b data input 14 v cc supply voltage 2004 may 19 4 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 handbook, halfpage mna240 32 1 2 3 4 5 6 7 8 14 13 12 11 10 9 1a 1b 1y 2a 2b 2y gnd 3y 3a 3b 4y 4a 4b v cc fig.1 pin configuration so14 and tssop14. 001aaa948 32 transparent top view 2y 3a 2b 3b 2a 4y 1y 4a 1b 4b gnd gnd (1) 3y 1a v cc 6 9 5 10 4 11 3 12 2 13 7 8 1 14 terminal 1 index area fig.2 pin configuration dhvqfn14. (1) the die substrate is attached to the exposed die pad using conductive die attach material. it can not be used as a supply pin or input. handbook, halfpage mna243 3 3 1 3 1 3 1 3 1 2 1 6 5 4 8 10 9 11 13 12 fig.3 iec logic symbol. handbook, halfpage mna242 1a 1b 1y 2 1 3 2a 2b 2y 5 4 6 3a 3b 3y 10 9 8 4a 4b 4y 13 12 11 fig.4 functional diagram. 2004 may 19 5 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 handbook, halfpage mna241 a b y fig.5 logic diagram (one gate). recommended operating conditions limiting values in accordance with the absolute maximum rating system (iec 60134); voltages are referenced to gnd (ground = 0 v). notes 1. the input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. for so14 packages: above 70 c the value of p tot derates linearly with 8 mw/k. for tssop14 packages: above 60 c the value of p tot derates linearly with 5.5 mw/k. for dhvqfn14 packages: above 60 c the value of p tot derate linearly with 4.5 mw/k. symbol parameter conditions 74ahc32 74ahct32 unit min. typ. max. min. typ. max. v cc supply voltage 2.0 5.0 5.5 4.5 5.0 5.5 v v i input voltage 0 - 5.5 0 - 5.5 v v o output voltage 0 - v cc 0 - v cc v t amb operating ambient temperature - 40 +25 +125 - 40 +25 +125 c t r , t f input rise and fall times v cc = 3.3 v 0.3 v -- 100 --- ns/v v cc =5v 0.5 v -- 20 -- 20 ns/v symbol parameter conditions min. max. unit v cc supply voltage - 0.5 +7.0 v v i input voltage - 0.5 +7.0 v i ik input diode current v i < - 0.5 v; note 1 -- 20 ma i ok output diode current v o < - 0.5 v or v o >v cc + 0.5 v; note 1 - 20 ma i o output source or sink current v o > - 0.5 v and v o 2004 may 19 7 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 t amb = - 40 c to +85 c v ih high-level input voltage 2.0 1.5 -- v 3.0 2.1 -- v 5.5 3.85 -- v v il low-level input voltage 2.0 -- 0.5 v 3.0 -- 0.9 v 5.5 -- 1.65 v v oh high-level output voltage v i =v ih or v il i o = - 50 m a; all outputs 2.0 1.9 -- v i o = - 50 m a; all outputs 3.0 2.9 -- v i o = - 50 m a; all outputs 4.5 4.4 -- v i o = - 4.0 ma 3.0 2.48 -- v i o = - 8.0 ma 4.5 3.8 -- v v ol low-level output voltage v i =v ih or v il i o =50 m a; all outputs 2.0 -- 0.1 v i o =50 m a; all outputs 3.0 -- 0.1 v i o =50 m a; all outputs 4.5 -- 0.1 v i o = 4.0 ma 3.0 -- 0.44 v i o = 8.0 ma 4.5 -- 0.44 v i li input leakage current v i =v cc or gnd 5.5 -- 1.0 m a i oz 3-state output off current v i =v ih or v il ; v o =v cc or gnd 5.5 -- 2.5 m a i cc quiescent supply current v i =v cc or gnd; i o = 0 a 5.5 -- 20 m a c i input capacitance --- 10 pf symbol parameter test conditions min. typ. max. unit other v cc (v) 2004 may 19 8 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 t amb = - 40 c to +125 c v ih high-level input voltage 2.0 1.5 -- v 3.0 2.1 -- v 5.5 3.85 -- v v il low-level input voltage 2.0 -- 0.5 v 3.0 -- 0.9 v 5.5 -- 1.65 v v oh high-level output voltage v i =v ih or v il i o = - 50 m a; all outputs 2.0 1.9 -- v i o = - 50 m a; all outputs 3.0 2.9 -- v i o = - 50 m a; all outputs 4.5 4.4 -- v i o = - 4.0 ma 3.0 2.40 -- v i o = - 8.0 ma 4.5 3.70 -- v v ol low-level output voltage v i =v ih or v il i o =50 m a; all outputs 2.0 -- 0.1 v i o =50 m a; all outputs 3.0 -- 0.1 v i o =50 m a; all outputs 4.5 -- 0.1 v i o = 4.0 ma 3.0 -- 0.55 v i o = 8.0 ma 4.5 -- 0.55 v i li input leakage current v i =v cc or gnd 5.5 -- 2.0 m a i oz 3-state output off current v i =v ih or v il ; v o =v cc or gnd 5.5 -- 10.0 m a i cc quiescent supply current v i =v cc or gnd; i o = 0 a 5.5 -- 40 m a c i input capacitance --- 10 pf symbol parameter test conditions min. typ. max. unit other v cc (v) 2004 may 19 9 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 type 74ahct32 at recommended operating conditions; voltages are referenced to gnd (ground = 0 v). symbol parameter test conditions min. typ. max. unit other v cc (v) t amb =25 c v ih high-level input voltage 4.5 to 5.5 2.0 -- v v il low-level input voltage 4.5 to 5.5 -- 0.8 v v oh high-level output voltage v i =v ih or v il i o = - 50 m a; all outputs 4.5 4.4 4.5 - v i o = - 8.0 ma 4.5 3.94 -- v v ol low-level output voltage v i =v ih or v il i o =50 m a; all outputs 4.5 - 0 0.1 v i o = 8.0 ma 4.5 -- 0.36 v i li input leakage current v i =v ih or v il 5.5 -- 0.1 m a i oz 3-state output off current v i =v ih or v il ; v o =v cc or gnd per input pin; other inputs at v cc or gnd; i o =0a 5.5 -- 0.25 m a i cc quiescent supply current v i =v cc or gnd; i o =0a 5.5 -- 2.0 m a d i cc additional quiescent supply current per input pin v i =v cc - 2.1 v other inputs at v cc or gnd; i o =0a 4.5 to 5.5 -- 1.35 ma c i input capacitance -- 310pf t amb = - 40 c to +85 c v ih high-level input voltage 4.5 to 5.5 2.0 -- v v il low-level input voltage 4.5 to 5.5 -- 0.8 v v oh high-level output voltage v i =v ih or v il i o = - 50 m a; all outputs 4.5 4.4 -- v i o = - 8.0 ma 4.5 3.8 -- v v ol low-level output voltage v i =v ih or v il i o =50 m a; all outputs 4.5 -- 0.1 v i o = 8.0 ma 4.5 -- 0.44 v i li input leakage current v i =v ih or v il 5.5 -- 1.0 m a i oz 3-state output off current v i =v ih or v il ; v o =v cc or gnd per input pin; other inputs at v cc or gnd; i o =0a 5.5 -- 2.5 m a i cc quiescent supply current v i =v cc or gnd; i o =0a 5.5 -- 20 m a d i cc additional quiescent supply current per input pin v i =v cc - 2.1 v other inputs at v cc or gnd; i o =0a 4.5 to 5.5 -- 1.5 ma c i input capacitance --- 10 pf 2004 may 19 10 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 t amb = - 40 c to +125 c v ih high-level input voltage 4.5 to 5.5 2.0 -- v v il low-level input voltage 4.5 to 5.5 -- 0.8 v v oh high-level output voltage v i =v ih or v il i o = - 50 m a; all outputs 4.5 4.4 -- v i o = - 8.0 ma 4.5 3.70 -- v v ol low-level output voltage v i =v ih or v il i o =50 m a; all outputs 4.5 -- 0.1 v i o = 8.0 ma 4.5 -- 0.55 v i li input leakage current v i =v ih or v il 5.5 -- 2.0 m a i oz 3-state output off current v i =v ih or v il ; v o =v cc or gnd per input pin; other inputs at v cc or gnd; i o =0a 5.5 -- 10.0 m a i cc quiescent supply current v i =v cc or gnd; i o =0a 5.5 -- 40 m a d i cc additional quiescent supply current per input pin v i =v cc - 2.1 v other inputs at v cc or gnd; i o =0a 4.5 to 5.5 -- 1.5 ma c i input capacitance --- 10 pf symbol parameter test conditions min. typ. max. unit other v cc (v) 2004 may 19 11 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 ac characteristics type 74ahc32 gnd = 0 v; t r =t f 3.0 ns; see fig.7. notes 1. typical values are measured at v cc = 3.3 v. 2. typical values are measured at v cc = 5.0 v. symbol parameter test conditions min. typ. max. unit waveforms c l t amb =25 c v cc = 3.0 v to 3.6 v ; note 1 t phl /t plh propagation delay na, nb to ny see fig.6 15 pf - 3.9 7.9 ns 50 pf - 5.6 11.4 ns v cc = 4.5 v to 5.5 v ; note 2 t phl /t plh propagation delay na, nb to ny see fig.6 15 pf - 2.8 5.5 ns 50 pf - 4.1 7.5 ns t amb = - 40 c to +85 c v cc = 3.0 v to 3.6 v t phl /t plh propagation delay na, nb to ny see fig.6 15 pf 1.0 - 9.5 ns 50 pf 1.0 - 13 ns v cc = 4.5 v to 5.5 v t phl /t plh propagation delay na, nb to ny see fig.6 15 pf 1.0 - 6.5 ns 50 pf 1.0 - 8.5 ns t amb = - 40 c to +125 c v cc = 3.0 v to 3.6 v t phl /t plh propagation delay na, nb to ny see fig.6 15 pf 1.0 - 10.0 ns 50 pf 1.0 - 14.5 ns v cc = 4.5 v to 5.5 v t phl /t plh propagation delay na, nb to ny see fig.6 15 pf 1.0 - 7.0 ns 50 pf 1.0 - 9.5 ns 2004 may 19 12 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 type 74ahct32 gnd = 0 v; t r =t f 3.0 ns; see fig.7. note 1. typical values are measured at v cc = 5.0 v. symbol parameter test conditions min. typ. max. unit waveforms c l t amb =25 c v cc = 4.5 v to 5.5 v ; note 1 t phl /t plh propagation delay na, nb to ny see fig.6 15 pf - 3.1 6.9 ns 50 pf - 4.3 7.9 ns t amb = - 40 c to +85 c v cc = 4.5 v to 5.5 v t phl /t plh propagation delay na, nb to ny see fig.6 15 pf 1.0 - 8.0 ns 50 pf 1.0 - 9.0 ns t amb = - 40 c to +125 c v cc = 4.5 v to 5.5 v t phl /t plh propagation delay na, nb to ny see fig.6 15 pf 1.0 - 9.0 ns 50 pf 1.0 - 10.0 ns 2004 may 19 13 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 ac waveforms handbook, halfpage mna244 t phl t plh v m v m na, nb input ny output gnd v i fig.6 the input (na, nb) to output (ny) propagation delays. family v i input requirements v m input v m output ahc gnd to v cc 0.5 v cc 0.5 v cc ahct gnd to 3.0 v 1.5 v 0.5 v cc handbook, full pagewidth open gnd v cc v cc v i v o mna245 d.u.t. c l r t 1000 w pulse generator s1 fig.7 load circuitry for switching times. test s1 t plh /t phl open t plz /t pzl v cc t phz /t pzh gnd definitions for test circuit: c l = load capacitance including jig and probe capacitance. rt = termination resistance should be equal to the output impedance z o of the pulse generator. 2004 may 19 14 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 package outlines unit a max. a 1 a 2 a 3 b p cd (1) e (1) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 0 o o 0.25 0.1 dimensions (inch dimensions are derived from the original mm dimensions) note 1. plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 sot108-1 x w m q a a 1 a 2 b p d h e l p q detail x e z e c l v m a (a ) 3 a 7 8 1 14 y 076e06 ms-012 pin 1 index 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.35 0.34 0.16 0.15 0.05 1.05 0.041 0.244 0.228 0.028 0.024 0.028 0.012 0.01 0.25 0.01 0.004 0.039 0.016 99-12-27 03-02-19 0 2.5 5 mm scale so14: plastic small outline package; 14 leads; body width 3.9 mm sot108-1 2004 may 19 15 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 unit a 1 a 2 a 3 b p cd (1) e (2) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.72 0.38 8 0 o o 0.13 0.1 0.2 1 dimensions (mm are the original dimensions) notes 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 sot402-1 mo-153 99-12-27 03-02-18 w m b p d z e 0.25 17 14 8 q a a 1 a 2 l p q detail x l (a ) 3 h e e c v m a x a y 0 2.5 5 mm scale tssop14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm sot402-1 a max. 1.1 pin 1 index 2004 may 19 16 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 terminal 1 index area 0.5 1 a 1 e h b unit y e 0.2 c references outline version european projection issue date iec jedec jeita mm 3.1 2.9 d h 1.65 1.35 y 1 2.6 2.4 1.15 0.85 e 1 2 0.30 0.18 0.05 0.00 0.05 0.1 dimensions (mm are the original dimensions) sot762-1 mo-241 - - - - - - 0.5 0.3 l 0.1 v 0.05 w 0 2.5 5 mm scale sot762-1 dhvqfn14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm a (1) max. a a 1 c detail x y y 1 c e l e h d h e e 1 b 26 13 9 8 7 1 14 x d e c b a 02-10-17 03-01-27 terminal 1 index area a c c b v m w m e (1) note 1. plastic or metal protrusions of 0.075 mm maximum per side are not included. d (1) 2004 may 19 17 philips semiconductors product speci?cation quad 2-input or gate 74ahc32; 74ahct32 data sheet status notes 1. please consult the most recently issued data sheet before initiating or completing a design. 2. the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the latest information is available on the internet at url http://www.semiconductors.philips.com. 3. for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. level data sheet status (1) product status (2)(3) definition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn). definitions short-form specification ? the data in a short-form specification is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values definition ? limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information ? applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. disclaimers life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes ? philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change notification (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. ? koninklijke philips electronics n.v. 2004 sca76 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owne r. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not con vey nor imply any license under patent- or other industrial or intellectual property rights. philips semiconductors C a worldwide company contact information for additional information please visit http://www.semiconductors.philips.com . fax: +31 40 27 24825 for sales of?ces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com . printed in the netherlands r44/03/pp 18 date of release: 2004 may 19 document order number: 9397 750 13221 |
Price & Availability of 74AHC32BQ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |